-18x16.jpg)
Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with CNC Egy!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
YKD2608M-H (7.2A)
1. High performance, 2. Provides 16 kinds microstep selection,upmost microstep can be set to 200x;3. Special circuit design,reduce noise, enhance steadiness;4. The upmost pulse response frequence amounts to 200Kpps;5. Once the pulse stops for 100ms,phase current automatically cut by half;6. Bip..
1. High performance,
2. Provides 16 kinds microstep selection,upmost microstep can be set to 200x;
3. Special circuit design,reduce noise, enhance steadiness;
4. The upmost pulse response frequence amounts to 200Kpps;
5. Once the pulse stops for 100ms,phase current automatically cut by half;
6. Bipolar constant current chopper control;
7. Photocoupler isolated input/output;
8. Adjustable drive current range from 2.0A/phase-6.0A/phase;
9. Single power input, voltage range from AC18-80V;
10. Protection circuit
Overheat protection, overcurrent, under voltage protection.
11. Dimension:151x107x48mm,Net Weight:0.5kg.
DESCRIPTION OF YKC2608M-H
YKC2608M-H is a constant torque high performance driver with microstep,
voltage range from AC18-80V single power input. It can match two phase
hybrid step motors whose rated current under 6.0A flange size range from 57 to 86mm.
Owe to bipolar constant current chopper control of the driver circuit,
the motor can run smoothly and hardly has any noise. Rising the voltage can greatly improve high speed performance
and output torque of the motor. Once the pulse stops for 100ms,the phase current will automatically cut by half,
which can reduce chances of overheat. Users can operate the driver with microstep in low speed occasion.
The upmost microstep can be set to 200.
Weight : 500 g
AC 18~80 V --- 7.2 A
FOR NEMA 23 ~ 34