AMETER

DC 50mA ampere meter electrical current meter ampere gauge amperemeter for CO2 laser tube laser galvanometerAmmeter 0-50mA class of accuracy: 2.5 Base error: +-2.5%Damping response time: less than 4 second Pressurization: AC50Hz 2kv Lasted for one minuteDimension :64*56*52mm work..

GDZ

CHILLER CW3000

Constant and intelligent mode of attemperationHigh precision of temperature controlWater flow, high and low temperature alertWide model selection, more configurationHigh energy efficiency ratio, energy saving SpecificationsOne-stop automatic intelligent temperature control: in different environ..

CIRCUIT BREAKER

Application:DZ47LE series circuit breaker, full name of residual current circuit breaker with overcurrent protection, is mainly used in the rated voltage 220V for single pole two- wire,2-pole or 400V for 3-pole, 3-pole 4-wire, 4-pole and rated current up to 63A. When somebody gets an electirc shock ..

COMPRESSOR 750W

220V 750W Exhaust Fan Air Blower Centrifugal for CO2 Laser Engraving Cutting Machine Medium Pressure Lower NoiseApplication   :The medium pressure blower adopts the centrifugal structure, the shell and the impeller are divided into two types, the aluminum alloy type and the cold rolli..

HAILEA--ACO-009E 160W 220V LASER MACHINE PUMP

160W Air Compressor Electrical Magnetic Air Pump ACO-009E for CO2 Laser Engraving Cutting MachineModel:ACO-009EVoltage:220-240VFrequency:50HzPower:160WOutput:145L/minPressure:0.04MpaDimensions:283*147*173mm 2.Features:The case is made of high quality ZL 102 aluminum alloy with streamline design..

HY 150W C02 laser power supply

HY 150W C02 laser power supply for laser engrave machine. 150w power box for all brand laser tubeItem specificsWeight:5KG  Dimensions:40X30X15  Engraving Speed:500MM/S  Main Axle Rotational Speed:500MM/S  Feeding Height:100mm  Rated Power:150W &..

Leadshine 3 PH Stepper Motor 573S10-LS

Original Leadshine Stepper Motor 573S10-LS 1.0NM ,  3 Phase Stepper Motor For CNC Laser Cutting Engraving MachineItem specificsOptical axis extension length 28MMStep angle: 1.2°Frame number: 57Holding torque: 1~2.0NMLarge torqueRunning smoothlyLow feverLow noise General specifications ..

Leadshine 3 Phase Microstep Drive 3DM580

Leadshine 3 Phase Microstep Drive 3DM580 RS232 2.5A-8A 1-axis Max.500Khz Parameters3DM580MinTypicalMaxUnitOutput Current1.0-8.0ASupply Voltage+1836+50VDCLogic Signal Current71016mAPulse Input Frequency0-500kHzIsolation Resistance100MΩSuitable Stepper MotorsNEMA 23, 34    P1 ..

MOTOR

3 PHASE DRIVER FOR NEMA 23..

RD 6442S

Technical Parameters: 1.Digital laser control signals:(1) TTL level output, 50 mA,drive capability can set enable signal polarity in software(2) PWM frequency 2K-50K for adjustable(3) PWM duty ratio is 1% ~ 99%, adjustable(4) PWM value is up to 5.0 V2.Motor control signal:common-anode output, d..

S & A ORIGINAL CHILLER CW5202

S&A LASER CHILLERS - GENUINE PRODUCTCW 5202 INDUSTRIAL REFRIGERATION CHILLERS – DUAL TUBE1400W cooling capacity using environmentally friendly refrigerant.2 inlets and 2 outlets for dual tube coolingCompact size, long working life and simple operation.±0.3℃ precisely temperature control from 6 d..

WATER PROTECTION SENSOR ORIGINAL HT30

This water sensor is to protect the laser tube, is the water pump is not working, the water sensor will detective, and shut show the laser machine, so the laser tube will not broken. Product descriptionThis water flow switch features high temperature resistant, high sensitivity and safe to use...